Mechanical Engg.

Mechanical Engg.

Faculty Publication

DEPARTMENT OF MECHANICAL ENGINEERING

Sl.NO Faculty Name Topic Details
86 A Lakshumu Naidu, Dr.D. Nageswara Rao Production and Characterization of Nanocomposite Materials from layered silicate clay. Journal of Materials Processing Technology, ELSEVER [Under Pre Review].
85 A. Lakshumu Naidu, Dr.D. Nageswara Rao Studies on Characterization and Mechanical Behavior of Natural Clay. International Journal of Multidisciplinary and Current Research, IJMCR ISSN: 2321-3124, July-August-2013.
84 Dr. Biswajit Nayak Dynamic stability of a rotating sandwich beam with magnetorheological elastomer core. European Journal of Mechanics A/Solids.
83 Dr. Biswajit Nayak Multi-frequency excitation of magnetorheological elastomer-based sandwich beam with conductive skins. International Journal of Non-Linear Mechanics.
82 Dr. Biswajit Nayak Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions. Journal of Sound and Vibration.
81 Dr. Biswajit Nayak Fabrication and Characterization of Magnetorheological Elastomer with Carbon Black. Journal of Intelligent Material Systems and Structures.
80 Dr. Biswajit Nayak Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using FEM. Proceedings of the Institution of Mechanical Engineerings, Part C: Journal of Mechanical Engineering Science.
79 Dr. Biswajit Nayak Dynamic stability of magnetorheological elastomer based adaptive sandwich beam with conductive skins using FEM and the harmonic balance method. International Journal of Mechanical Sciences.
78 Prof. Dillip Kumar Mohanta Metal Inert Gas (Mig) Welding Parameters Optimization. International Journal of Multidisciplinary and Current Research (IJMCR) vol 2 may-june 2014.
77 Prof. Mahendra Kumar Rath Exergy and Energy analysis of Diesel engine using Karanja methyl ester under varying compression ratio. International Journal of Engineering Vol-27.
76 Prof. Mahendra Kumar Rath Thermodynamic analysis of compression ignition engine using neat Karanja oil under varying compression ratio. International Journal of Ambient Energy.
75 Prof. Mahendra Kumar Rath Performance analysis of karanja and kusum oils as alternative bio-diesel fuel in diesel engine. Int J Agric & Biol EngVol. 4.
74 Dr. Ramesh Chandra Mohanty Damping in Layered and Jointed Riveted Structures with Equal Thickness. Proceedings of the Institution of Mechanical Engineers: Part C, Journal of Mechanical Engineering Science.
73 Dr. Ramesh Chandra Mohanty Investigation into the Dynamics of Layered and Jointed Cantilevered Beams. Proceedings of the Institution of Mechanical Engineers: Part C, Journal of Mechanical Engineering Science.
72 Dr. Ramesh Chandra Mohanty Effect of thickness ratio on the slip damping of jointed aluminium cantilever beams. International Journal of Design Engineering (IJDE), Inderscience, Vol. 4.
71 Dr. Ramesh Chandra Mohanty Determination of slip damping in jointed riveted beams by finite element approach. Australian Journal of Mechanical Engineers (AJME), Vol. 9, No. 1, pp. 59-69, 2011.
70 Dr. Ramesh Chandra Mohanty Effect of Micro-slip on the Damping Capacity of Jointed Riveted Structures with Unequal Thickness. Journal of Vibration and Control (JVC), Vol. 17, No. 2, pp. 235-244, Feb. 2011.
69 Dr. Ramesh Chandra Mohanty Finite element analysis of slip damping in riveted built-up beams. International Journal of Structural Engineering (IJSE), Vol. 3, No. 4, pp. 250-266, 2012.
68 Dr. Ramesh Chandra Mohanty Damping Improvement in Layered and Jointed Beams by Finite Element Analysis. Advanced Materials Research (AMR), Vol. 505. pp 501-505, 2012.
67 Dr. Ramesh Chandra Mohanty Biogas as Alternate Fuel in Diesel Engines: A Literature Review. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 9, Issue 1, pp. 23-28, Sept. 2013.
66 Dr. Ramesh Chandra Mohanty A Study on Application of Biogas as Fuel in Compression Ignition Engines. International Journal of Innovations in Engineering and Technology (IJIET), Vol. 3, Issue 1, pp. 239-245, Oct. 2013.
65 Dr. Ramesh Chandra Mohanty Biogas Production from Kitchen Wastes: A Source of Renewable Energy. International Journal of Innovative Research & Studies (IJIRS), Vol. 2, Issue 11, pp. 42-50, Nov. 2013.
64 Dr. Ramesh Chandra Mohanty Anaerobic Digestion of Kitchen Wastes – Biogas Production and Pretreatment of Wastes: A Review. International Journal of Scientific and Research Publications (IJSRP), Vol. 3, Issue 11, pp. 1-6, Nov. 2013.
63 Dr. Ramesh Chandra Mohanty Anaerobic Digestion of Kitchen Wastes: A study on Biogas Production and Upgradation through Purification. International Journal of Innovative Research & Studies (IJIRS), Vol. 2, Issue 12, pp. 570-587, Dec. 2013.
62 Dr. Ramesh Chandra Mohanty Anaerobic Digestion of Kitchen Wastes: Biogas Production, Purification and Application in I.C. Engines. International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol. 3.
61 Dr. Ramesh Chandra Mohanty Experimental Investigation of Karanja Oil as a Fuel for Diesel Engine using Shell and Tube Heat exchanger. World Academy of Science, Engineering and Technology, International Science Index 85, International Journal of Chemical, Materials Science and engineering (IJCMSE), Vol. 8, No. 1, pp. 91-98, Jan. 2014.
60 Dr. Ramesh Chandra Mohanty Effects of Compression Ratio on Performance of a Single Cylinder 4- Stroke Compression Ignition Engine using Blends of Karanja Oil Methyl Ester with Diesel in Dual Fuel Mode. International Journal of Engineering Sciences and Research Technology (IJESRT), Vol. 3.
59 Dr. Ramesh Chandra Mohanty Study on Improvement of Damping in Jointed Cantilever Beams using FEM . International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol. 3.
58 Prof. Chiranjibi Mohanty & Prof. Babuli Kumar Jena Optimization of Aluminium Die Casting Process Using Artificial Neural Network. International Journal of Emerging Technology and Advanced Engineering 4(1) (2014).
57 Prof. Mr. Dillip Kumar Mohanta/ Prof. Saumya Kanta Sethi Effectiveness of Multi-Layer Coated Tool In Turning Of Aisi 430f Steel. International Journal of Research in Engineering and Technology 3 (2014).
56 Prof. Biswojyoti Pani Characterization of Mechanical Properties of Iron-Mud Filled Glass Fiber Reinforced Epoxy Composites. International Journal of Mechanical Engineering and Materials Sciences 4(2) July-December 2011.
55 Prof. (Dr.) A. M. Mohanty Portable High Speed Consumable guide welding. National Welding Seminar, Bangalore, India.
54 Prof. (Dr.) A. M. Mohanty Hot wire techniques. Research Bulletin/WRI, BHEL.
53 Prof. (Dr.) A. M. Mohanty Contributions to the discussion of Oxygen content in the submerged arc weld metal. IIW: DOC: XII-A-178-79.
52 Prof. (Dr.) A. M. Mohanty Investigation on quasi narrow gap submerged arc welding. Proceedings of International Welding Conference at Osaka, Japan.
51 Prof. (Dr.) A. M. Mohanty Selection of hot wire submerged arc welding parameters. IIW, National Meet, Cochin, India.
50 Prof. (Dr.) A. M. Mohanty Welding Techniques for Pressure Vessels. Research Bulletin, /WRI, BHEL.
49 Prof. (Dr.) A. M. Mohanty Evaluation of increased deposition in hot wire submerged arc welding with chosen parameters for pipes up to 40mm thickness. IIW:DOC:XII-A-15-81.
48 Prof. (Dr.) A. M. Mohanty Approaches to one side welding of Deck Plate Joints with varying root Gaps. National welding Seminar. Cochin, India .
47 Prof. (Dr.) A. M. Mohanty A study of manganese reaction and Oxygen content in submerged arc weldment. National IIW seminar. Calcutta, India.
46 Prof. (Dr.) A. M. Mohanty Manganese transfer and oxygen. IIW: DOC: XII-A-1096-87. SOFIA
45 Prof. (Dr.) A. M. Mohanty Mechanical and Wear Properties of Carburized Low Carbon Steel Samples International Journal of Multidisciplinary and current research 2 (2014)
44 Prof.Mir Sadat Ali Bio – gas as an alternative fuel for IC engines Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
43 Mr.Arun Manohar  Gurram
Mr.D.Raghuveer
Dr.P.S.V.Ramanarao
Solar Powered Wheel Chair: Mobility For Physically Challenged  published in International Journal of Current  Engineering  and Technology, Vol.2,No.1 (March- 2012)
42 Mr.Arun Manohar Gurram
Mr.D.Raghuveer
An Article on Solar Powered Wheel Chair  published in a National Magazine ” Energy Next” November Issue 2012
41 Mr. A.Lakshumu Naidu
Mr.B.Sudarshan
Study On Mechanical Behavior Of Groundnut Shell Fiber Reinforced Polymer Metal Matrix Composites Published in International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 2, February- 2013 
40 Mr.A. Lakshumu Naidu
Mr.D. Raghuveer
Mr.P.Suman
Studies on Characterization and Mechanical Behavior of Banana peel Reinforced Epoxy  Composites   Published in International Journal of Scientific & Engineering Research, Volume 4, Issue 6, June 2013
39 Dr.D.Sreeramulu Automatic feature recognition using IGES file in prismatic parts Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
38 Mr.B.Sudarshan Modular Manufacturing for Quality and Product Development in Industries Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
37 Mr.A.L.Naidu Studies on characterization and mechanical behavior of layered silicate clay Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
36 Mr.M.Venkatesh Importance of blending karanja oil with methanol & its utilization in a diesel engine. Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
35 Mr.P.V.N.R. Yagneswar  A study of active noise control in air-crafts Presented and published in National conference on green engineering and technologies-2k13
(16th and 17thMarch- 2013)
34 Mr. Sukanta Nayak DYNAMICS OF LIQUID DROPLET ON FLAT PLATE IN SHEAR FLOW WITH ADIABATIC CONDITIONS published in the Proceedings of 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference held in IIT Kharagpur, India, December 28-31, 2013
33 Mr. P.Ssuman A New Methodology to Extract Machining Features From Prismatic Parts Presented a paper in  ICAET- 2014 ( international conference in engineering and technology -2014 ) in singapore
32 Mr.Mir Sadat Ali Modelling the Effect of Cryo-treatment, preheating and SMAW process parameters on Weldment characteristics by ANN. European Journal of Scientific research (in press).
31 Mr.Mir Sadat Ali A Comparative study of Engine performance by using different Bio Fuels. European Journal of Scientific research, Vol 21, 2008
30 Mr.Mir Sadat Ali Affect of different Input parameterson weldment characteristics in Tungsten inert gas welding. American Journal of Scientific research, Vol.12, Nov 2010.
29 Mr.Mir Sadat Ali Dr.P.S.V.RamanaRao Study of Mechanical properties in a weld bead of dissimilar metals. International Journal of Engineering Science and Technology, vol3 No:52011.
28 Dr.D.Sreeramulu Generation of optimum sequence of operations using ant colony algorithm International Journal of Advanced Operations Management 2012
27 Dr.D.Sreeramulu Identification of Patterns in Genetic Algorithm Based Solutions for Optimization of Proces Planning Problems Using a Data Mining Tool International Journal of Applied Management and Technology Volume 10, No. 1, 2012, pp. 16-33.
26 Dr.D.Sreeramulu A New Methodology for Recognizing Features in Rotational Parts Using STEP Data Exchange International Journal of Engineering, Science and Technology Vol. 3, No. 6, 2011, pp. 102-115.
25 Dr.D.Sreeramulu A New Algorithm for Recognizing Hole Features from STEP File International Journal of Applied Management and Technology Volume 9, No. 2, Nov. 2010
24 Dr.D.Sreeramulu Integration of Feature Recognition and Process Planning Using VRML and Petri Nets International Journal of Manufacturing Science and Production Vol.10, No.2, 2009, pp.75-90.
23 Dr.D.Sreeramulu A New Methodology for Recognition of Milling features from STEP File International Journal of Applied Management and Technology, Volume 6, No. 4, Nov. 2008, pp.172-190.
22 Dr.D.Sreeramulu Machining Feature Recognition and Process Plan Generation for Prismatic Parts International Journal of Scientific Computing, Vol.2, No.2, 2008, pp.129-143.
21 Dr.D.Sreeramulu Recognition of Machining Features and Optimum Process Plan Generation using Genetic Algorithms International Journal of Manufacturing Science and Production Vol.9, No.3-4, 2008, pp.145-159.
20 Dr.D. Nageswara Rao Performance profiling of boric acid as lubricant in machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.30 (3) (2008).
19 Dr.D. Nageswara Rao Surface model and tool wear prediction model for solid lubricant assisted turning. Proceedings of Institute of Mechanical Engineers, part-J: Journal of Engineering Tribology, Vol.222 (5) (2008).
18 Dr.D. Nageswara Rao Performance evaluation of solid lubricants in terms of machining parameters in turning. International Journal of Machine Tools and Manufacture, Vol.48 (10) (2008), 1131-1137.
17 Dr.D. Nageswara Rao Surface model and tool wear prediction model for solid lubricant assisted turning. Proceedings of Institute of Mechanical Engineers part-J: Journal of Engineering Tribology, Vol.222 (5), 2008
16 Dr.D. Nageswara Rao Estimation of Cavitation Pressure to Disperse Nano Reinforcements in Metal Matrix Composites. In International journal IJNSTEEE (International Journal of Nanosystems, Electrical and Electronics Engg), Vol.1, Issue.1, June 2008, PP. 57-63.
15 Dr.D. Nageswara Rao Experimental analysis of sisal nanofluids in a shell coil heat exchanger. International Journal of Nanosystems Vol.1, 2008, PP.85-88.
14 Dr.D. Nageswara Rao Preparation and characterization of biodegradable nanoparticles. International Journal of Nanosystems, Vol.1, 2008, pp1-4.
13 Dr.D. Nageswara Rao Mathematical Modeling of the Influence of Emulsifier Content on Performance of Cutting Fluids. Journal of the Brazilian Society of Mechanical Sciences and Engineering Apr./June 2008, vol.30, no.2, 139-144.
12 Dr.D. Nageswara Rao Predictive modeling of Surface roughness and tool wear in solid lubricant assisted turning of AISI 1040 steel. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223.
11 Dr.D. Nageswara Rao Experimental Investigations on the Influence of Emulsifier Content in Cutting Fluids on Machined Surface. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223 (2), 2009, 195-201.
10 Dr.D. Nageswara Rao 10. Applicability of Cutting Fluids with Nano Particle Inclusion as Coolants in Machining, Proceedings of the Institution of Mechanical Engineers. Part J, Journal of Engineering Tribology, Vol. 223 (2), 2009, 221-225.
9 Dr.D. Nageswara Rao 9. Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear and surface roughness. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, Vol. 223, (2), 2009, 203-209.
8 Dr.D. Nageswara Rao The influence of solid lubricant particle size on machining parameters in turning. International Journal of Machine Tools & Manufacture 48 (2008) 107 to 111
7 Dr.D. Nageswara Rao An Approach to feature-based three dimensional modeling and similarity assessment of turned components. IMechE Vol.221 Part B:J.Engineering Manufacture, 2007.
6 Dr.D. Nageswara Rao Influence of Emulsifier Content on Properties and Durability of Cutting Fluids. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29 (4), 396-400, 2007.
5 Dr.D. Nageswara Rao Effect of emulsifier content on microbial contamination of cutting fluids. Int. J. Machining and Machinability of Materials, Vol. 2, Nos. 3/4, 2007 pp 469-477.
4 Dr.D. Nageswara Rao Influence of Emulsifier content on cutting fluid properties. Proceedings of the I MECH E Part B Journal of Engineering Manufacturing,Vol.220, pp 1803-1806, 2006.
3 Dr.D. Nageswara Rao Online Prediction of Diffusion wear on the flank through tool tip temperature in turning using artificial neural networks. Proceedings of the I MECH E Part B Journal of Engineering Manufacturing,Vol.220,pp 2069-2076, 2006.
2 Dr.D. Nageswara Rao Integration of CAD/CAM/CAE In Product Development System Using Step/Xml. Concurrent Engineering: Research and Applications, Vol-14,no-2 June-2006, pp 121-128.
1 Dr.D. Nageswara Rao Automatic Modular Fixture Generation in Computer-Aided Process Planning Systems. Proceedings of the I MECH E Part C Journal of Mechanical Engineering,Vol.219,pp 1147-1152, 2005.